Design and Manufacturing with SMT-BGA-BTC

Tel 503-332-3215 for any questions. 

Time & Dates

2023 SMT-BGA-BTC Class Dates

April 17-20, 2023 (Mon-Thu)

July 17-20, 2023 (Mon-Thu)

November 6-9, 2023 (Mon-Thu)

Four full days are required to cover all the material

8:30 AM to 5:30 PM Pacific Standard Time

Note: Since class size is limited to allow close interaction, please get your registration in early.

Course Fees

$1,495 FOR SMT/BGA COURSE- The course fee includes all course materials. Each attendee will receive a comprehensive workbook containing all the presentation materials (over 600 slides). The hand out material is sent to attendees before the class.

WHO SHOULD ATTEND THIS COURSE

Manufacturing, process, design, test, quality personnel and their managers who are involved in designing or producing tin-lead/Lead Free SMT and mixed-technology assemblies and want to reduce product cost and improve process yield should attend this course. 

About the SMT-BGA-BTC Course

This is an in-depth FOUR day SMT-BGA-BTC course that deals with both tin-lead and Lead Free (RoHS) design and manufacturing issues. There is extensive coverage of technical issues related to dealing with backward compatibility (soldering of lead free BGAs and other components when using tin-lead solder paste).

This is a course for those who are just getting into SMT or those who have been in the business for years.

This class is being taught by someone who started in SMT when you could not get a book on SMT until he wrote one in 1987 (and revised since then - SMT Principles and Practice) and who set up SMT at Boeing and Intel from scratch in early and mid 80's and has been deeply involved with the activities of IPC. Ray Prasad has chaired many of the critical SMT related IPC standards such as Land Pattern (IPC 782 now IPC 7531), Moisture sensitivity and Package Cracking (IPC 786, now J-STD 020/33) in mid 80s. Currently he chairs BGA (IPC 7095), BTC (IPC 7093) and Reflow Reflow (IPC 7530) standards and is currently consults and teaches across the globe.

Most companies generally realize the benefits of Electronics Manufacturing by trial and error at considerable expense and frustration. The objective of this course is to identify the technical issues in Through hole, SMT, tin-lead, Lead Free BGA and fine pitch technology design and manufacturing that must be resolved for an effective implementation of mixed assembly electronics products.

The course material is based on Ray’s textbook Surface Mount Technology: Principles and Practice, 2nd Edition, the latest revision of IPC -7095, Design and Assembly Process Implementation for BGA, IPC-7093 “Design and Assembly Process Implementation for Bottom Terminations surface mount Components (BTCs) such as QFN, DFN and MLF, and IPC 7530, Temperature Profiling for Reflow and Wave Soldering. Ray Prasad chaired all these three IPC committees to initiate, develop and publish these standards.

Before delving into the details of SMT design and manufacturing, students are brought up to speed on SMT processes and components. The first part provides an overview of SMT and advanced packaging technologies.

After covering Technology Overview, we delve into the details of Design for Manufacturing, test and repair of SMT and BGA and Fine Pitch components. And the third part of the course provides an in-depth details of all the SMT manufacturing processes including Selective Soldering, Lead free soldering, Mixed (Tin-lead and Lead Free on the same board) inspection, Quality Control and repair. We conclude the course by discussion of various defects and their root causes.

This is not a theoretical course. Based on Ray’s years of experience in successfully implementing SMT at Boeing and Intel, and various clients, this course deals with "real- world" problems in SMT. Attendees will get an insight into the interdependency of design and manufacturing to achieve higher yield, lower cost and faster time to market.

After each section, detailed quizzes are used to ensure that the material covered "sinks in." Plenty of time is allowed for questions and answers. There are 18 pages of quiz to cover plus all the questions that you may have.

This class can also be taught at your own site and customized to meet your specific needs. If you have multiple engineers who may benefit from this course, it may be more cost effective to hold the class at your site at a mutually agreed date. Please contact us for the details.

How You Will Benefit

  1. This course can help you establish a strong internal infrastructure in DFM for SMT, fine pitch BGA and BTC using both tin lead and lead free components. You will get a good understanding of root causes of major defects in SMT and through hole tin-lead and Lead Free assemblies and ways to prevent them. After completing this course you will be able to:
  2. Get an in-depth understanding SMT, tin-lead and LF BGA, CSP and emerging technologies such as BTCs (QFN, MLF)
  3. Troubleshoot BGA, fine pitch and BTC problems in manufacturing
  4. Determine best way to deal with backward and forward compatibility situations (Lead Free BGAs on a primarily tin-lead board)
  5. Understand metallurgy of lead free solder to enable selection of appropriate lead free solder alloys, soldering and rework processes and equipment.
  6. Understand factors in selecting appropriate components and PCB laminates and how lead free affects your choices for components, laminates and surface finishes
  7. Ensure your boards are designed for manufacturability and yield
  8. Troubleshoot SMT, BGA, BTC and fine pitch problems in manufacturing for both tin lead and lead free.
  9. Use the knowledge gained in this course to develop and or improve your internal DFM and Process documents.

COURSE OUTLINE


Part 1: SMT Overview

  • SMT Process Steps
  • SMT Passive and Active Components
  • BGA, BTC, Flip chip and MCM
  • Implementation Strategy & Summary
  • Review/Questions/Answers

Part 2: Designing For Manufacturing

DFM for Lead Free Only

  • Laminate & Surface Finishes
  • Component Considerations
  • Reliability Considerations

DFM for both Tin-Lead and Lead Free

  • Handling of Moisture Sensitive Components
  • Land Pattern Design
  • Via Size, Spacing & Layer Count Considerations
  • Testability
  • Review/Questions/Answers

Part 3: Manufacturing Processes

  • Adhesive and Its application
  • Solder paste and its application
  • Solderability & Soldering (Wave & Reflow)
  • Application Specific Soldering
    • Selective Soldering
    • Vapor Phase Soldering
    • Laser Soldering
    • Low Temperature Soldering
    • Mixed Alloy Soldering
  • Flux and Cleaning and No Clean
  • Quality Control, Inspection and Repair
  • Review/Questions/Answers

Part 4: Brining it All Together: RootCause Analysis of Defects

  • Examples of Defects related to Design
  • Examples of Defects related to incoming materials’
  • Examples of Defects related to Manufacturing processes
  • Key Strategies in preventing in design and manufacturing processes to prevent fieldreturns

Part 5: Discussion of defects you are experiencing.

  • Discussion of Defects of interest to you
  • Detailed (18 Page) Quiz to review the material covered

    This course is a comprehensive technical overview of SMT and covers all the details of SMT Design for Manufacturing, test and repair of SMT and BGA and Fine Pitch components.

    This is Zoom Class. If your company would like to have a class on your site, we can offer a customized class at your site as well.

    Since class size is limited to allow close interaction, please get your registration in early. Since this is a zoom class, there is a break every hour for few minutes and considerable time is allocated for questions and answers. 

    This class may be offered on site in Beaverton sometime in future as was the case before the pandemic. However, we have all gotten so used to on-line zooom/team classes and hence this class class is being offered on-line only at this time. 

    This is Zoom Class. If your company would like to have a class on your site, we can offer a customized class at your site as well. 

    Tel 503-332-3215 

    2023 SMT-BGA-BTC Class Dates

    April 24-27, 2023 (Mon-Thu)

    July 17-20, 2023 (Mon-Thu)

    November 6 -9, 2023 (Mon-Thu)

    Last day is for review and specific questions you may have. 

    8:30 AM to 5:30 PM Pacific Standard Time

    Note:Since class size is limited to allow close interaction, please get your registration in early. Since this is a zoom class, there are frequent breaks for few minutes and considerable time is allocated for questions and answers. 

    $1,495 FOR SMT/BGA COURSE- The course fee includes all course materials. Each attendee will receive a comprehensive workbook containing all the presentation materials (over 600 slides). The hand out material is sent to attendees before the class.

    Please note that Ray Prasad has been teaching this course few times a year since year 2000. However, the course content has been revised as the technology has evolved during this time. 

    Please also note that this course can offered at your own site. On site courses may be very cost effective if there are multiple students who may be interested in this class. If interested, please contact us for details. 

    This class may be offered on site in Beaverton sometime in future as was the case before the pandemic.  However, we have all gotten so used to on line zooom/team classes and hence this class class is being offered on line.  If however, this class is offered on site, the hotels listed below are some of the choices and there are many others.  In this day of google, you dont need hotel recommendations but use the addresses below just know that class location will be less than five miles from these hotels. 

    America's Best Inn and Suites

    3333 SW 198 th Ave

    Aloha, OR 97006

    503-642-4531

    Larkspur Landing

    3133 NE Shute Road

    Hillsboro, OR 97124

    877-310-5723

    Courtyard PDX Hillsboro-owned by Marriott

    3050 NW Stucki Place

    Hillsboro, OR 97124

    503-690-1800

    Residence Inn-owned by Marriott

    18855 NW Tanasbourne Drive

    Hillsboro,OR97124

    503-531-3200

    Double treebyHilton

    15402NWCornellRoad

    Beaverton,OR97006

    503-614-8100

    ExtendedStayAmerica

    19311NWCornellRoad

    BeavertonOR97124

    503.439.0706

    Extended Stay America

    18665NWEiderCrt

    BeavertonOR97006

    503.439.1515


    Part 1: SMT Overview SMT Process Steps  SMT Passive and Active ComponentsBGA, BTC, Flip chip and MCMImplementation Strategy &...

    Manufacturing, process, design, test, quality personnel and their managers who are involved in designing or producing tin-lead/Lead Free SMT and mixed-technology assemblies and want to reduce product cost and improve process yield should attend this course. 

Registration is Open for SMT Course

Ray Prasad will be teaching his flagship SMT course: 

Design and Manufacturing with SMT-BGA-BTC

eCommerce Web Site powered by MightyMerchant